YZ450F

Lever with forged folding pivot blade to replace the original.

• Folds to prevent damage
• Excellent performance as pivot ratio mimics the original
• Adjustable lever to grip distance to rider preference
• Brass pivot bushing for rider feel 

Prevents mud building-up on radiator and between radiator panels in muddy conditions.

• Additional protection helps to give the radiator a longer life
• Reduces coolant temperature built-up during muddy conditions
• Easy to cut in any shape
• Easily installed
• Sold per pair (left & right side) 

This foam protects engine from built-up mud and sand between skid plate and engine.

• Prevents the engine heat built-up and keeps it cooler during muddy conditions
• Durable
• Lightweight
• Quickly installed 

Stylish blue anodized rim lock nuts to replace the original.
Easy to install - no special tools required 

Complete replacement kit including seal closed KOYO bearings, seals, distance collar and circlip
Complete kit 

Stylish blue rear brake clevis to replace the original

• Easy replacement
• Gives wider range to adjust the rear brake pedal 

Stylish blue aluminum plug to replace the original plastic cap.

• Easy replacement
• Lockwire holes to secure cap during races 

Stylish blue rear brake reservoir cover to replace the original cover.
Easy replacement 

• Stylish blue ignition cover plug kit to replace the original plug.
• Easy replacement
• Sold per pair 

• Stylish blue axle blocks to replace the original.
• Easy replacement
• One teeth rear sprocket offset for quick rear wheel exchange with different sprocket size (+/- 1 teeth)
• After offset change, no need to adjust chain slack 

• Grab the holeshot - every time!
• Gives the front fork pre-load for better starts
• Easy instalation
• No need to remove front fork 

• Wheels built for champions! Exclusive high performance Kite front wheel like used by Yamaha factory racing teams.
• Complete assembled wheel
• Seal closed KOYO bearings
• Takasago EXCEL Signature rim
• Alpina spokes
• Hub CNC machined out of one block Alluminium 6082
• Pre-installed seals 

• Wheels built for champions! Exclusive high performance Kite front wheel like used by Yamaha factory racing teams.
• Complete assembled wheel
• Seal closed KOYO bearings
• Takasago EXCEL Signature rim
• Alpina spokes 

Guards to protect rider's hands from small stones and debries.

• Yamaha branded
• Quickly installed 

Meter to help you to keep track of your engine's operating hours.
Includes pre-programmed service intervals at 10 hours (initial) and every 50 hours thereafter
A flash alert displays for a 2-hour period upon reaching the specified interval
Works with all Yamaha 4-stroke models, including Yamaha gasoline generators and pumps 

This handy tool is great for removing exhaust system springs, seat or any other springs, like the side stand spring.
Durable and of high quality
Firm grip 

Lever with forged folding pivot blade to replace the original.

• Folds to prevent damage
• Excellent performance as pivot ratio mimics the original
• Adjustable lever to grip distance to rider preference
• Brass pivot bushing for rider feel 

Top-quality brake line designed to not fatigue even under extreme conditions.

• Utilizes Teflon® inner liner supported by a rugged 308 stainless steel outer jacket
• Silver braided lines with black banjo fittings 

Blue anodized pinch to replace the original.

• For great looking accents on your Yamaha
• High quality material 

Guard to protect the chain.

• Constructed of durable Ultra High Molecular Weight Polyethylene (UHMWPE)
• Flexible; will not bend in the event of a large impacted 

Rear break clevis machined to extremly tight tolerances.

• Minimizes lateral movement or vibration of the rear brake pedal
• Allows more height adjustment
• Features a titanium clevis pin that is half the weight of the original pin 

Top-quality brake line designed to not fatigue even under extreme conditions.
Utilizes Teflon® inner liner supported by a rugged 308 stainless steel outer jacket
Silver braided lines with black banjo fittings 

Axle blocks keep the adjustment bolts from extending too far back when running the rear wheel toward the back of the swing arm for maximum wheelbase.

• Reversible
• Hard-anodized billet aluminum
• Sold per pair 

Axle blocks keep the adjustment bolts from extending too far back when running the rear wheel toward the back of the swing arm for maximum wheelbase.

• Reversible
• Hard-anodized billet aluminum
• Sold per pair 

Lightweight and waterproof work pad to enable clean and neat maintenance in a grass or dirt covered paddock.
Large dimensions (1,770 x 1,370mm) and padding provide a proper and pleasant working area
Toughened centre pad provide stabililty to your paddock stand
FIM approved
Yamaha Racing, GYTR® and Yamalube® branded 

Very compact T-driver tool with all Yamaha size socket.

• Includes a 3/8” tip driver
• 8, 10, 12, 14, and 17mm sockets and 5 and 6mm hex bits and a #2 Phillips screwdriver bit
• A socket clip attaches to the driver to keep the sockets in order
• Rugged vinyl pouch keeps the tools protected 

Funnel to pour oil in engines easily and neatly.

• Helps to keep the oil free of dirt and debris
• Screw-on lids at both ends 

Plier for safety wire to secure racing parts and grips.

• A must for every serious racer's tool box
• Manufactured from high-quality tool steel
• Allows you to grip, cut, twist the safety wire in one quick motion 

Get Factory Racing look and function with these blue 25mm rear wheel spacers.
Easy to install - no special tools required 

• Wheels built for champions! Exclusive high performance Kite rear wheel like used by Yamaha factory racing teams.
• Complete assembled wheel
• Seal closed KOYO bearings
• Takasago EXCEL Signature rim
• Alpina spokes
• Hub CNC machined out of one block Alluminium 6082
• Pre-installed seals
• Two bearings on chainwheel side
• Reduced weight due to teflon bearing spacer 

• Give your bike the full factory look with the Akrapovič Aluminium Exhaust Sticker set.
• Set of 2
• Featuring Akrapovič logo
• Aluminium exhaust sticker set 

• Featuring a 20mm lower seat height that offers enhanced controllability when cornering, the Low Seat Assembly comes with a gripper cover and is ready to bolt straight on.
• Easy to fit
• Comes complete with gripper cover
• 20mm lower riding position 

• Spare sticker for the GYTR® MX Glide Plate.
• Features GYTR® logo 

• Prevent unwanted particles damaging your YZ450F fuel pump and fuel injector by fitting this in-tank fuel filter.
• Lightweight in-tank sock-type filter
• Protects your bike’s fuel pump and fuel injector
• Easy to fit
• 47mm diameter – fits under fuel tank cap 

• Reinforces the radiator to protect it from impacts from the front.
• Constructed with rolled edges and a structural rib that runs along the side of the brace
• Deliver an optimized strength-to-weight ratio
• Does not restrict airflow to radiator or increase overheating
• Design provides also protection from peel back
• Easy-to-install; no loose spacers, no trimming of plastics 

• Stainless steel bracket offering mounting a point for the lock wire.
• Fits under every M6 bolt
• Sold as set of 3 brackets
• Stainless steel bracket 

• Replaces the original oil drain bolt, and prevents metal shavings from circulating in the motor oil.
• Used by Yamaha Racing Teams
• Safety wire holes to secure oil drain bolt from loosening during races
• Includes lock wire bracket and copper gasket
• Lighter than original bolt 

For communication with the rider during training or race via written text.
Size: 60 x 32 cm
Features Yamaha Racing and GYTR logos
White background for better reading of text
Including 4 mm whiteboard marker in black color
Easy to clean with soft cloth
Lightweight fabric makes it easy to stretch-out arm to the max 

Protects the handlebar grips from dirt and water while waiting in paddock or starting grid. And also looks very nice when bike is parked in the workshop. Be like a pro!
Quick installation and removal with velcro
Features GYTR® logo
Fitting on all handlebar grips
Used by factory racing teams
Includes reminder text "remove before flight"
Sold as pair (left/right) 

• Yamaha-branded valve cap
• Billet aluminium valve cap with Yamaha logo
• Available in 3 colors: black, blue and red 

Yamaha-branded valve cap
Billet aluminium valve cap with Yamaha logo
Available in 3 colors: black, blue and red 

Yamaha- branded valve cap in black color.

• Billet aluminium valve cap with Yamaha logo
• Available in 3 colors: black, blue and red 

• This easy to fit accessory increases your maximum coolant pressure to 2.0 bar for improved cooling efficiency.
• Reduces coolant loss at high temperatures
• Replaces the original radiator cap
• Especially designed for GYTR® racekit
• Quick installation 

• Easy to install Repack Kit ensures peak power delivery and minimizes noise output.
• Easy installation
• Replacement kit for Akrapovic muffler
• New rivets and strips included 

• This glide plate is designed to protect engine and frame of your MX bike.
• Protects underside of the engine from sand and mud
• Features special holes for cooling
• Specifically designed for this model
• Easy installation 

• Wheels built for champions! Exclusive high performance Kite rear wheel like used by Yamaha factory racing teams.
• Complete assembled wheel
• Seal closed KOYO bearings
• Takasago EXCEL Signature rim
• Alpina spokes
• Hub CNC machined out of one block Alluminium 6082
• Pre-installed seals
• Two bearings on chainwheel side
• Reduced weight due to teflon bearing spacer 

• The Race Pit Mat is perfect for the garage, outdoors, or in the pits at the track to provide superior footing.
• Waterproof
• FIM approved
• Rubber backing
• Min. 1 liter oil absorption
• Size: 210 x 100 cm 

• The Race Pit Mat is perfect for the garage, outdoors, or in the pits at the track to provide superior footing.
• Waterproof
• FIM approved
• Rubber backing
• Min. 1 liter oil absorption
• Size: 210 x 100 cm 

Complete replacement kit including seal closed KOYO bearings, seals, distance collar and circlip
Complete kit 

• Charger required to wake up li-on battery from safe mode and charge the battery. Applicable to European markets only.
• To be used to charge Li-on battery
• Plug and play 

• High performance, foam air filter that offers optimized filtration while maximizing airflow
• Washable
• Improves airflow
• Special collar enclosed to prevent water and dirt collection at the center of the filter
• By Twin Air® 

• Enhance the coolness of your Yamaha!
• Made of high quality, heat resistant titanium alloys
• High-tech sophisticated design
• Creates an exciting sound
• Exclusive logo decal
• improves power of the engine
• Non street legal - for closed-ciruit use only
• A full list of spare parts is available via your official Yamaha dealer 

Protects intake from dust and / or after intrusion during cleaning of the bike.

• Easy mounting
• By Twin Air® 

These GYTR® radiator cages offer another level of protection against serious radiator damage.
Full cage with rod design
Lightweight yet sturdy constructed with stamped 3.2 mm aluminum to provide strength and protection in the event of side impacts
Small modification can be done on radiator shroud to reduce overall width increase
Easy-to-install design means radiator removal is not required
Installs in minutes 

• Provides more grip compared to the standard seat option.
• Quick and easy to install
• Extra ribs added to prevent sliding on seat
• Factory racing look 

• Yamaha-branded valve cap
• Billet aluminium valve cap with Yamaha logo
• Available in 3 colors: black, blue and red 

• Improves the brake feeling on the front.
• SS braided brake line
• Replaces the original brake line 

Yamaha- branded valve cap in black color.
Billet aluminium valve cap with Yamaha logo
Available in 3 colors: black, blue and red